Dvi Modes - NEC MultiSync LCD 3735WXM Manuel D'utilisation

E-16 LCD 3735WXM
Setup
·
Time zone
·
EA
·
About
Password
·
Rating
·
Password
Image Page, OSM Page, Audio Page, PIP Page
These functions are the same as they are in video mode.

DVI modes:

Image Page
·
Brightness
·
Contrast
Color Page
·
Color Temp.
·
User R
·
User G
·
User B
Setup Page
·
DVI Mode
·
Back Light
·
Sharpness
·
Noise Reduce
·
Recall Default
Select your location time zone.
Emergency Alert, there are two modes (Medium, Low) to turn On / Off.
Show the DTV system information.
Select the type of programming to block.
User could set or change parent lock password and this password will associ-
ate with the password in TV Video setting modes.
Adjusts the overall image and background screen brightness.
Adjusts the image brightness in relation to the background.
There are four modes available: 6500K, 7500K, 9300K, USER
Use the "RIGHT" and "LEFT" keys to increase or decrease the Red level. The
change in color will be shown on the screen and the adjustment level will be
shown by the bars.
Use the "RIGHT" and "LEFT" keys to increase or decrease the Green level. The
change in color will be shown on the screen and the adjustment level will be
shown by the bars.
Use the "RIGHT" and "LEFT" keys to increase or decrease the Blue level. The
change in color will be shown on the screen and the adjustment level will be
shown by the bars.
There are two DVI modes to choose from. It is recommended to use "DVI-PC" when
connecting to a PC and "DVI-HD" when connecting to a DVD player.
Use "RIGHT" and "LEFT" keys to adjust the backlight level
Adjust the image to get as distinct or as soft a picture as is preferred.
It could remove the noise in the picture by applying temporal and spatial noise
reduction filters to the video data. There are four level (OFF, Weak, Medium,
Strong ).
Select this function will allow the user to reset the settings back to the factory
settings.