NEC MultiSync LCD 3735WXM Manuel D'utilisation page 31

E-22 LCD 3735WXM
Basic operation (Continued)
Changing the channels on TV
Change channels by using Channel Select on the remote control.
·
This LCD allows you to select up to 125 channels (1 to 125). To select a channel, enter a 1- or 2-
or 3 -digit number or use channel up and
CH+
CH-
NUMBER
KEYPADS
channel down.
To select a 1- or 2-digit channel
number (e.g., channel 5):
1
. Press the button.
0
2
. Press the button.
5
*
or press button only. .
5
To select a 3-digit channel
number (e.g., channel 115):
Complete the following procedure
within 4 seconds.
1
. Press the button.
2
. Press the button.
1
3
. Press the button.
5
Note:
·
The 3-digit channel number can be
selected only when the receiving
mode is set to CABLE in CH-SETTING.
(For details on setting the receiving
mode see page E-15.)