Unold SKYLINE Notice D'utilisation page 22

DE
4. Press the „ON/OFF" button once. A signal tone sounds again and the appli-
ance starts. In the basic setting the appliance runs at medium speed in
EN
Normal mode.
FR
Setting the speed
5. Press the „Speed" button until the appliance is working at the desired
NL
speed. The setting is shown by the respective indicator light:
IT Low speed
Medium speed
ES
High speed
PL
Setting the mode
Press the „Mode" button and select the desired operating mode. You can
select Standard mode, Near Natural mode, and Sleep mode. Press the
„Mode" button repeatedly until the desired setting is shown through the
appropriate indicator light.
Normal mode
Symbol
Near Natural mode
Symbol
The appliance works with alternating speeds that feel like the natural
movement of air.
Sleep mode
Symbol
The appliance works in Near Natural mode with permanently set speeds that
decrease incrementally.
Swing function/oscillation
6. Press the „Oscillation (Swing)" button to switch on the swing function.
Press the button again to stop the appliance in the current position, the fan
however continues to run.
Timer
7. Via the Timer button you can select the desired runtime of the appliance.
This is possible in the range from 1 hour to 8 hours. Press the „Timer"
button until the desired number of hours appears in the display. After this
22 von 68
Copyright UNOLD AG | www.unold.de
Stand 26.2.2020