Master Forge BG179CL Mode D'emploi page 20

OPERATING INSTRUCTIONS
7. Open the tank valve fully. Use a soapy water solution to check all connections for leaks
before attempting to light your grill. See "Pre Operation Leak Testing" on page 22. If a leak is
found, turn the tank valve off and do not use your grill until the leak is repaired.
As shown in Fig. 6a gas tank must be place vertically. It is unsafe to operate the grill if the gas
tank is not vertical as shown in Fig. 6b.
Fig. 6a
WARNING: The Type I connective coupling (see Fig. 7) supplied with your grill must
not be replaced with a different type of grill/tank connection system. Removal will result
in loss of warranty, gas leakage, fire and severe bodily harm.
Type I
Valve
Disconnecting A Liquid Propane
Gas (LP Gas) Tank From Your Grill
1. Turn the burner knobs and LP gas tank
valve to the full OFF position.
2. Detach the hose and regulator
assembly from the LP gas tank valve
by turning the quick coupling nut
counterclockwise. See Fig. 8.
CAUTION: When the appliance is
not in use, the gas must be turned
off at the supply tank
External
Hand Wheel
Thread
.
Fig. 6b
Thermally Propane
Sensitive Nut Regulator
Fig. 8
20
Fig. 7