Master Forge BG179CL Mode D'emploi page 16

NATURAL GAS CONVERSION
18. Remove the LP orifices of the main
burners and the side burners with the
orifice removal tool (BB) and install the
Φ1.45mm orifice (GG).
Hardware Used
Orifice
BB
Removal Tool
Φ1.45mm Orifice
GG
19. Re-install the side burners. Make
sure the orifices are aligned with the
burners and the ignition pins are
installed in their original positions. Check
for sparks before operating your grill.
20. Put the burners back in the firebox,
followed by the griddle and the grate.
Hardware Used
Phillips Head
CC
Screwdriver
18
x 1
x 3
19
20
x 1
16
Ignition Pin