Uline Ohaus Ranger Count 3000 Mode D'emploi page 11

LIGHT [LIGHT]
Sets backlight functionality.
• OFF = always off
• ON = always on
• AUTO = turns on when a button is pressed or the
displayed weight changes.
AUTO OFF [A.OFF]
Set the automatic shut off functionality.
• OFF = disabled
• 1 = powers off after one minute of no activity
• 5 = powers off after five minutes of no activity
• 10 = powers off after 10 minutes of no activity
END READOUT [END]
Advance to the next menu or return to the top of the
current menu.
UNIT MENU
This sub-menu activates units so they will be accessible
with the Units button. The units in the menu must be
turned on to be active.
NOTE: Available units vary by model and local
regulations.
PRINT1 MENU
Enter this menu to set printing parameters. Default
settings are in bold.
NOTE: The Print2 menu is only displayed if a
second interface is installed.
Reset
Stable Only
Auto Print
Content
Layout
PAGE 11 OF 69
MENU SETTINGS CONTINUED
no, yes
off, on
off, on stable, interval, continuous,
accept
P/N (-> off, on)
Result (-> off, on)
Gross (-> off, on)
Net (-> off, on)
Tare (-> off, on)
Header (-> off, on)
Footer (-> off, on)
Mode (-> off, on)
Unit (-> off, on)
Info (-> off, on)
APW (-> off, on)
Acc (-> off, result, all)
Format (->S,M)
Feed (->Line, 4 Lines, form)
Data Transfer
Print Lib
End Print
RESET [RESET]
Reset the Print menu to factory defaults.
• NO = no reset
• YES = reset
STABLE ONLY [STABLE]
Set the printing criteria.
• OFF = Values are printed immediately.
• ON = Values are only printed when the stability
criteria are met.
AUTO PRINT [A.PRINT]
Set the automatic printing functionality.
• OFF = disabled
• ON.STAB = Printing occurs each time the stability
criteria are met.
• INTER = Printing occurs at the defined interval.
• CONT = Printing occurs continuously.
• ACCEPT = Printing occurs each time the display is
within the Checkweigh accept range and stability
criteria are met.
CONTENT [CONTNT]
Define the content of the printed data.
• Part Number
• Set the status
• OFF = disabled
• ON = enabled (The part or SKU number set up in
Library will be printed)
NOTE: See Library section for how to enter part
or SKU number.
Result
Set the status.
• OFF = disabled
• ON = The displayed reading is printed.
off, on
yes, no
Exit menu
1021 IH-9554