Execution; Storage; Disposal - WM aquatec biolite Instructions D'utilisation

8.2 Execution

•
Disconnect the voltage supply to the biolite® and all relevant circuits
• Make sure that there is no water in the biolite® and in the water hoses/pipes.
• Remove the water pipes from the water connections of the biolite® (image 19).
First remove the locking clip (1). Press the retaining element back with your fi ngers or with the help
of a release aid (locking clip) and hold it there (2). The inserted tube/hose can now be removed (3).
• Disconnect the electrical connections of the biolite® directly before the respective wire-tap connectors.
• Professionally insulate the open ends of the electrical connection cables.
• Remove the biolite® from the mounting surface.
• If necessary, ensure that the water pipes are reconnected
• Plug/screw the fuses of all relevant circuits back in.
• Check the installation for leaks.

8.3 Storage

• In order to store the biolite® outside its place of use, please observe the storage conditions in
chapter Operating and ambient conditions (p.40).

9. DISPOSAL

• Electrical and electronic components must be disposed of in accordance with the legal requirements.
Image: 19
- 56 -