peerless-AV FPEPM-05 Installation page 5

Place adapter box (C) onto support column (A)
2
and adjust swivel to desired position as shown in
figure 2.1.
Secure adapter box to support column with four 1"
socket screws (E) using a 3/16" allen wrench as
C
shown in figure 2.2.
E
A
fig. 2.2
fig. 2.1
G
Insert two M10 x 16 mm socket screws (H) and
3
two split lock washers (I) into bottom of adapter
box (C) leaving 1/4" exposed thread as shown in C
figure 3.1 and detail 1.
Place column cap (G) onto top of column.
fig. 3.1
I
H
1/4"
DETAIL 1
5 of 24
ISSUED: 11-10-10 SHEET #: 061-9060-3 07-08-15