PMA 407 Mode D'emploi page 17

Adjusting the correction value
1
2
+
+
Examples
Parallel correction, no sensor connected
CP
CP
The correction value is
3,6 °C.
Change the correction
value (keys D I).
Correction value is 0.
Change the correction
value (keys D I).
The correction value is
-6,8 °C
A
Slope correction at measured temperature 1250°C
At the applied temperature,
1253°C are displayed.
Change the correction value
with keys D I.
The measured temperature
is displayed without
correction.
Change the correction value
with keys D I.
1247°C are displayed at the
applied temperature.
CG
*
CG
M