Operation; Working Safely; Inserting/Removing The Battery; Turning On And Off - Grizzly Tools AKHS 20 Set Traduction De La Notice D'utilisation Originale

GB
Only one position is possible.
Close the cutting head lock (14).
Working without the telescopic tube:
• Open the cutting head lock (14). Push
the cutting head (2) and operating
unit (6) together as far as they will go.
Only one position is possible.
Close the cutting head lock (14).

Operation

Please observe local regulations
concerning noise protection.

Working Safely

• Always wear appropriate clothing,
eye and ear protection and a protec-
tive helmet when working with this
device.
• Maintain the device and the cutting
equipment in good condition to avoid
injuries.
• Check that the carrying strap is in a
comfortable position that makes it
easier for you to hold the device.
• Always hold the device tightly with
both hands, with one hand on the
handgrip (
on the front handgrip (
vibration handle (
and fingers must firmly surround the
handles.
• Check the device for significant
damage or defects after it has been
dropped, become blocked or come
into contact with foreign bodies.
• Do not use the device when you are
standing on a ladder or a surface that
is not stable.
70
8) and the other hand
15) or anti-
5). Your thumbs
• Do not be tempted to make cuts that
you have not carefully considered. This
could endanger yourself or others.
• Change your working position regu-
larly. Prolonged use of the device can
lead to blood circulation disorders in
the hands caused by vibration. You
can, however, extend your machine
use time by wearing appropriate safety
gloves or by taking regular breaks.
Please ensure that if you are suscep-
tible to poor circulation, low outside
temperatures or strong gripping forces
while working, this may reduce the
length of time for which you are able to
work.
Inserting/Removing the
battery
1. To insert the battery (7), place it on
the guide track (19) and push it back
into the appliance. It will audibly snap
in.
2. To remove the battery (7) from the ap-
pliance, press the release button (20)
on the battery and pull out the battery.

Turning on and off

Maintain a firm stand and hold the
appliance well with both hands
and at some distance away from
your body. Before turning on the
appliance, check that it will not
touch any objects.
Starting with the telescopic tube
1. Put on the shoulder strap (
2. To turn on, use your thumb to
actuate the switch lock (10), then
press the On/Off switch (9). Re-
lease the switch lock. There is
no continuous operation mode.
17).