Functional Description; Installing / Removing Battery Pack - Black & Decker LSW60 Mode D'emploi

FUNCTIONAL DESCRIPTION

1. Variable Speed Trigger
2. Tube
3. POWERBOOST Button
4. POWERBOOST LED
5. Debris Scraper
5
A
TUBE ASSEMBLY
NOTE: Ensure the blower is switched off and
the battery is removed before attaching or
removing the blower tube. The tube must be
assembled to the housing before use.
• To attach the tube to the blower, line up the
tube with the blower housing as shown in
figure B.
• Push the tube into the blower housing until
the lock button (6) engages the lock hole
(7) on the tube.
B
7
A1
A1
6
3
4
2
INSTALLING / REMOVING
BATTERY PACK
• TO INSTALL BATTERY PACK:
Insert battery pack into tool until an
audible click is heard as shown in figure
C. Make sure battery pack is fully seated
and fully latched into position.
• TO REMOVE BATTERY PACK:
Depress the battery release button (8)
in the back of the battery pack and
pull battery pack out of tool assembly as
shown in figure D.
C
D
OPERATION
CAUTION:
safety glasses. Wear a filter mask if the
operation is dusty. Use of gloves, long pants
and substantial footwear is recommended.
Keep long hair and loose clothing away from
openings and moving parts. THIS BLOWER
IS FOR HOUSEHOLD USE ONLY.
• Hold the blower with one hand as shown
in figure E and blow from side to side
7
1
8
Always wear