+
Optelec
Traveller
User Manual
7. Charging the batteries
+
When the Traveller
is connected to the mains
power outlet, the internal batteries are automatically
charging. The LED-light (nr. 5 on page 4) will start
blinking once per second. When the batteries are
fully charged, this takes 3 hours, the LED-light will
blink once every 5 seconds.
The rechargeable batteries can be used 2.5 hours
continuously. The LED-light is now lit continuously.
As soon as the LED-light is interrupted every two
seconds, the batteries need to be recharged.
+
Connect the Traveller
to the mains power outlet. To
+
save energy, the Traveller
will automatically turn off
if no buttons are touched for 20 minutes.
17
English