Uv Index; Barometer; Rainfall; Backlight - Oregon Scientific WMR86NS Manuel De L'utilisateur

displaying the hourly history data for the last 10 hours
of UV index, and 24 hours of rainfall and barometric
pressure readings.
UVI

BAROMETER

The bar chart display shows the current and historical
data for the UV index, barometric pressure and rainfall
readings.
NOTE The number shown in the horizontal axis (Hr)
indicates how long ago each measurement was taken
(e.g. 3 hours ago, 6 hours ago, etc.). The bar represents
the measurement taken for that specific 1 hour period.
E.g., if it is 10:30 pm now, the bar plotted directly above
-1 shows the reading recorded from 9 to 10 pm and
-6 shows the reading recorded earlier in the evening,
between 4pm-5pm.
To view the UV / Barometer / Rainfall readings:
1. Press SELECT to navigate to the UV / Barometer /
Rainfall Area. will show next to the Area.
2. Press MODE to toggle between UVI / Barometer /
Rainfall readings. The corresponding icon will appear:
BAROMETER UVI
To select the measurement unit for the barometer or
rainfall readings:
In the UV / Barometer / Rainfall Area, press UNIT to
switch between:
• Barometer: Millimeters of mercury (mmHg), inches
of mercury (inHg), millibars per hectopascal (mb).
• Rainfall: Millimeters (mm), inches (in), recorded for
that hour.
NOTE As the purpose of the bar graph is only to provide
a quick comparison between the records of the past 24
hours, the vertical axis cannot convert from inches to mm.
Therefore, changing the measurement unit will have no
effect on the bar graph display.

UV INDEX

The UV index levels are as follows:
UV INDEX DANGER LEVEL
0-2 Low
3-5 Moderate
8-10 Very high
11 and above Extremely high
To view the maximum UV reading:
1. Press SELECT to navigate to the UVI / Barometer /
Rainfall Area. will show next to the Area.
2. Press MODE repeatedly to select UV display.
3. Press MAX / MIN to toggle between current / MAX
The timestamp is displayed accordingly in the Clock
Area.

RAINFALL

To clear maximum UV reading:
1. Press SELECT to navigate to the UVI / Barometer /
2. Press MODE repeatedly to select UV display.
3. Press and hold MAX / MIN to clear the readings.
BAROMETER
To set the altitude level compensation for the
Barometer readings:
1. Press SELECT to navigate to the UVI / Barometer /
2. Press MODE repeatedly to select Barometric
3. Press and hold MODE to enter the altitude setting.
4. Press
5. Press MODE to confirm the setting.
RAINFALL
To view the recorded rainfall of the current hour or
last 24 hours:
1. Press SELECT to navigate to the UVI / Barometer /
2. Press MODE repeatedly to select Rainfall display.
RAINFALL
3. Press MAX / MIN repeatedly to toggle between

BACKLIGHT

Press LIGHT to activate the backlight for 5 seconds.

RESET

Press RESET to return to the default settings.

SPECIFICATIONS

BASE STATION
Dimensions
(L x W x H)
Weight
Battery
AC/DC Adapter
ICON
INDOOR BAROMETER
Barometer unit
Measuring range
Accuracy
Altitude setting
Weather display
9
UV index display.
Rainfall Area. will show next to the Area.
Rainfall Area. will show next to the Area.
display.
/ to increase / decrease the setting value.
Rainfall Area. will show next to the Area.
current, past 24 hour rainfall or accumulated rainfall
readings.
94 x 51 x 182.5 mm
(3.7 x 2.0 x 7.2 inches)
241 g (8.5 oz) without battery
3 x UM-3 (AA) 1.5V
Input: 120 V, 60 Hz 50 mA
Output: DC 5V, 100 mA
mb, inHg and mmHg
700 – 1050mb/hPa
+/- 10 mb/hPa
Sea level
User setting for compensation
Sunny, Partly Cloudy, Cloudy,
Rainy and Snowy