Activate Alarm; Snooze; Barometer; View Barometer Area - Oregon Scientific BAR933HG Mode D'emploi

ACTIVATE ALARM

Navigate to the Clock Area, then press ALARM /
switch to Daily Alarm or Pre-Alarm view. To activate or
deactivate the alarm, press UP or DOWN.
When the alarm time is reached, the backlight will be on
for 5 seconds and crescendo alarm will sound for
2 minutes. Press any key (except snooze) to silence
the alarm. It will sound at the same time the next day.

SNOOZE

Press SNOOZE / LIGHT to temporarily disable the alarm
for 8 minutes. or , or
on.

BAROMETER

This product tracks fluctuations in barometric pressure
to provide the weather forecast, and the current and past
24 hours barometric pressure history measurements are
recorded by the main (indoor) unit.

VIEW BAROMETER AREA

Press SELECT to navigate to the Barometer Area.
If is NOT shown, press MODE.

SELECT MEASUREMENT UNIT

Slide the mb / inHg switch (in the battery compartment),
to change the display unit.

VIEW BAROMETER HISTORY

To view the last 24 hours barometric history, navigate to
the Barometer Area. Then press HISTORY repeatedly
to scroll through the measurements. The number shown
in the HR box indicates how long ago each measurement
was taken (e.g. 2 hours ago, 3 hours ago, e.t.c.).

SET ALTITUDE

Set the altitude to match how far above or below sea
level you are living. This ensures that the barometric
pressure readings are accurate.
1. Navigate to the Barometer Area.
2. Press and hold HISTORY for 2 seconds.
3. Press UP or DOWN to set the altitude in 10-metre
increments (-100m to 2500m).
4. Press HISTORY to confirm.
All manuals and user guides at all-guides.com
to
will blink while Snooze is

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather
within a 30-50 km (19-31 mile) radius. The forecast is
based on barometric pressure trend readings.
The top area shows an animated icon indicating the
forecasted weather.

WEATHER FORECAST ICONS

ICON DESCRIPTION
Clear
Day / Night
Partly cloudy
Day / Night
Cloudy
Rainy
NOTE The night time icon displays from 6 PM to 6 AM.
When the Channel 1 sensor records a temperature of
2°C (35.6°F) or lower, the RAINY icon becomes SNOWY.

UV MEASUREMENT

The UVR138 Ultra-Violet Radiation Sensor is included
with the BAR986HG and is available as an optional item
for the BAR933HG. The UV sensor gives you the
following information at your fingertips:
• 10-hour Ultra-Violet Index (UVI) record.
• Automatic calculation of acceptable UV exposure
times based on pre-set user profiles (4 users
maximum).
• UVI Danger Alert when UV Index reaches unsafe levels.
UV data is shown in the same area as the Barometer.
Press SELECT to navigate to the Barometer Area, then
press MODE to display the UV icon
Refer to the UVR138 User Manual for more
NOTE
information and see below to learn about the new
additional UV features.
8
Snowy
and data.