Temperature, Humidity And Pressure Trend; Ice Warning; Hi / Lo Temperature / Humidity Alarms; Heat Index - Oregon Scientific BAR388HG Manuel De L'utilisateur

To end auto-scan:
Press CHANNEL or MEM.
To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM for 2 seconds.

TEMPERATURE, HUMIDITY AND PRESSURE TREND

The temperature, humidity and pressure trend icons are
based on recent sensor readings.
RISING STEADY

ICE WARNING

If the channel 1 sensor falls between 3°C to –2°C (37°F
to 28°F), flashes to warn you that the temperature is
approaching freezing.
NOTE The warning will automatically stop if the
temperature goes outside the ice-warning range.

HI / LO TEMPERATURE / HUMIDITY ALARMS

Temperature and humidity alerts can be set to sound
if sensor set to channel 1 records above or below a
temperature/humidity of your choice.
To set alarm ON / OFF:
1. Press and hold TEMP / HUMIDITY HI / LO
2. Use
humidity alarm. Press TEMP / HUMIDITY HI / LO
to confirm.
3. Press
/ HUMIDITY HI / LO
4. If alarm has been activated, use
the temperature / humidity.
5. Press TEMP / HUMIDITY HI / LO
To silence the hi / lo alarm:
Press any key. The alarm resets automatically and will
resound if the hi / lo temperature is recorded again.
FALLING

HEAT INDEX

The heat index combines temperature and humidity data
to describe the actual temperature felt.
WARNING
Extreme
danger
Danger
Extreme
caution
Caution
8
and to select high / low temperature /
/ to set alarm ON / OFF and press TEMP
to confirm.
HEAT INDEX
Strong risk of
54.5°C / (130°F)
dehydration / sun
or above
stroke
40.5 - 54°C Heat exhaustion
(105 - 129°F) likely
32.2 - 40°C Possibility of heat
(90 - 104°F) dehydration
26.6 - 31.7°C Possibility of heat
(80 - 89°F) exhaustion
.
and to select
to confirm.
MEANING