Table des Matières
Publicité
Refer to the "Battery Station LEDs Description" for more information about the
various LEDs.
Battery Station LEDs Description
LED Indicators
Power Indicator
Solid green
Battery Status LEDs
Solid green
Blinks green
Solid yellow
Blinks yellow
Blinks yellow twice
Blinks yellow three times
Solid red
Blinks red
Blinks red twice
Warning LED
Blinks yellow
Solid yellow
Blinks red
Blinks red twice
Blinks red three times
Blinks red four times
For errors marked with *, please contact your local dealer or a representative from the DJI
after-sales team.
Buzzer Beeping Description
Buzzer beeping is used to indicate errors as outlined below.
1. When the Battery Status LED is red, the buzzer is beeping to indicate a battery error.
2. When the Warning LED is red, the buzzer is beeping to indicate a Battery Station
hardware error.
Descriptions
Powered on.
Charging completed.
Charging.
Waiting for charging.
Warming up before charging.
Cooling down before charging.
Cannot charge the battery due to very low temperature.
Please charge the battery in the place of higher temperature.
Battery error. *
Battery communication warning, please try other battery
ports.
Battery short circuit, please try other battery ports.
Battery Station is updating.
The input voltage is too low. Please use the power supply
that meets the requirements.
Power module communication error or other. *
Motherboard error. *
Fan error. *
Battery Station self-test error. *
©
2020 DJI All Rights Reserved.
5
Publicité
Table des Matières
