Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Contennts
1.
Specifications
2.
User Responsibility/ Warranty
3.
Assembly
3.1
Initial Assembly
3.2
Fitting the Table
3.3
Fitting the Rip Fence Guide
3.4
Fitting the Crank Handle
3.5
Assembling the Rip Fence
3.6
Fence Adjustment
3.7
Centering the Table to the Blade
3.8
Setting the Table Square to Sawblade
3.9
Adjusting the Rip Fence Guide Scale
3.10 Checking the Table forFlatness
3.11 Stability of the Bandsaw
3.12 Dust Extraction
1. Specifications
Dimensions without stand (lxwxh)
Weight with motor
Table height from floor (w/o stand)
Table height from floor on workstand
Throat width
Max. cutting height
Sawblade length
Sawblade width
Sawtable tilt
Sawtable size
Sawblade speeds
Motor power
2. User Responsibility /warranty
This appliance will perform in conformity with the description contained in the instructions provided.
This machine must be checked periodically. Defective equipment (including power cable) should
not be used. Parts that are broken, missing, obviously worn, distorted or contaminated, should be
replaced immediately. Should such repair or replacement become necessary, it is recommended
that only genuine replacement parts are used and that such repairs are carried out by qualified
persons. This appliance or any of its parts should not be altered or changed from standard
specifications. The user of this machine shall have the sole responsibility for any malfunction which
results from improper use or unauthorized modification from standard specifications, faulty
maintenance, damage or improper repair by any other than qualified person.
3.13 Lower Blade Guard
3.14 Tilting the Bandsaw Table
3.15 Replacing the Bandsaw Blade
3.16 Tracking the Bandsaw Blade
3.17 Adjusting the Blade Guides
3.18 Adjusting the Cutting Height
3.19 Changing the Blade Speed
4.
Operation
5.
Maintance
6.
Troubleshooting
7.
Wiring
7.1
Wiring Instructions
7.2
Wiring Diagram
8.
Part List
550x750x1180mm
65KG (without stand)
500mm
1020mm
345mm
200mm
2490mm
6-19mm
0º-45º
400x548mm
440 or 900 m/min(50Hz)
1000 W
-1-
GB
Publicité
Table des Matières
