Altrad ATIKA AP 40-2000 Notice Originale page 24

Use only the matching charger ATIKA ALG 40-1800 to

charge the lithium-ion battery.
The battery is supplied partially charged. Fully charge the
lithium ion batteries therefore before first use and/or after a
longer idle period of the machine.
 Connect the battery with the charger. Make sure the charge
plug has been pushed onto the contacts (D) of the battery.
 Charge process:
The LEDs on the battery flash green and the charge indicator
of the charger is lit green continuously.

The charger and the battery will become warm during
charging. This is normal.
Charge the battery only at temperatures between 10°

and 45 ° C

Check the charging operation regularly.
Duration of charge process: approx. 130 min. - AP 40-4000
 Charging completed:
The LEDs of the battery briefly light up green and then go off.
The LEDs of the charger light up green continuously.
 After completed charging, remove the battery and disconnect
the charger from the mains.
Never leave the battery in the charger after it has
been fully charged.
24
Charging the rechargeable battery
approx. 60 min. - AP 40-2000