Prior To First Use - Inventum GF350HLD Mode D'emploi

3
prior to first use
Before using the appliance for the first time, you should proceed as follows: carefully unpack the hot air fryer and remove all packaging
material and any promotional stickers. Keep the packaging (plastic bags and cardboard) out of the reach of children. After unpacking
the appliance, check it for external damage that may have occurred during transport. Place the hot air fryer on a sturdy, flat and heat-
resistant surface.
The keys used to operate the hot air fryer are touch controls. Carefully touch the controls with a finger to activate. At each touch
of a touch control, you can hear a sound signal.
STANDBY
As soon as you insert the plug in the socket, the hot air fryer is in the standby position. The standby key
In the following situations, the hot air fryer will automatically switch to the standby position:
• when you insert the plug in the socket
• if no key is touched for a period of 60 seconds
• when the set time has elapsed
• when you press the standby key
SWITCHING ON / OFF
Switch on the hot air fryer with the standby key
• The hot air fryer only functions if the basket has been placed in the pan correctly.
• As soon as the set time has elapsed, the hot air fryer will automatically switch to the standby position: The fan does continue to run
in order to allow the hot air fryer to cool down. After approximately 20 seconds, 5 beeps will sound and the fan symbol
BEFORE USING FOR THE FIRST TIME
Check that the voltage corresponds with what is stated on the information plate and insert the plug in an earthed socket.
The heating element is provided with a protective layer that must be removed prior to first use. This is done by setting the hot air fryer
to the maximum position for approximately 10 minutes without any food in the appliance. Light smoke may form due to the protective
layer burning off the heating element. Therefore, ensure proper ventilation in the room. After removing the protective layer you can
switch off the hot air fryer.
Remove the plug from the socket and clean the individual components before you actually start using the hot air fryer. Clean
the basket and the pan with warm water, a mild washing-up liquid and a soft sponge. Tip: these components may also be cleaned in
the dishwasher.
Clean the interior and exterior of the appliance with a damp cloth.
This fryer works with hot air. Do not fill the pan with oil or frying fat.
• Place the hot air fryer on a heat-resistant flat surface.
• Properly place the basket in the pan.
• Place the pan in the hot air fryer.
CAUTION! Properly place the pan in the hot air fryer, otherwise it will not function.
Do not fill the pan with oil or other liquids.
Place nothing on top of the appliance.
Do not place anything over the air inlet openings. This will disrupt the air circulation and will have a negative effect
on the frying result.
SETTING TEMPERATURE AND TIME
Use the and keys to set the temperature and time. Press the
The display automatically changes every 5 seconds if no key is used any more.
c
• The 0 key is only visible when the temperature is shown in the display.
• The key is only visible when the time is shown in the display.
for 3 seconds.
.
c
0
or key to change between temperature and time display.
lights up red.
is switched off.
17
English •