Operation And Use - Mr. Coffee NLS12 Manuel D'instructions

B F U
EFORE IRST SE
Before using your Coffeemaker for the first time, wash decanter/lid and removable brew
basket (black) using a mild, non-abrasive detergent and water. Rinse each thoroughly.
Follow Steps 4 – 6 (Brewing Coffee) using water, to clean the inside.
PM
H
OUR
S
ET
S
(NLX20, NLX20D, NLX23, NLX23D)
N : You do not have to set your clock before the Coffeemaker will operate.
OTE
Plug in the power cord, slide the control lever to the "on" position. The green
light will illuminate.
1. Turn the AUTO/OFF/ON switch to "OFF. "
2. Plug the power cord into your electrical outlet. The clock display will flash
until you set the time.
3. Alternately press and hold the "HOUR" and "MINUTE" buttons until you reach
the current time. The "PM" indicator light in the display will illuminate to
indicate PM time.
1. Press and hold the "BREW" button while setting the desired brew time with the
"HOUR" and "MINUTE" buttons. The "PM" indicator light in the display will
illuminate to indicate PM time.
B
REWING
1. Follow Steps 1 – 5 in the "BREWING" Section.
2. Press the PRESS/HOLD button. The "AUTO" indicator light should illuminate.
3. Brewing will begin at the preset time. The coffee will remain hot in
the decanter for 2 hours. To keep your coffee hot for an additional 2 hours,
press the "SELECT" button. The "ON" indicator light should illuminate.
O
PERATION AND
C D
LOCK ISPLAY
M A /O
INUTE UTO FF
S O S
ET N WITCH
C
ETTING LOCK AND
S C
ETTING THE
P B
RESETTING THE REWING
A
UTOMATICALLY AT THE
5
U
SE
OFF
I B
NDICATOR REW
L B
IGHT UTTON
T
IMER
LOCK
T
IME
P T
RESET IME