Publicité
Les langues disponibles
Les langues disponibles
Notes for Movement and
Transport
• Remove all food from inside the appliance.
Then, transport the appliance only after fixing
fragile parts such as shelves and the door
handle with tape. Failure to do so may cause
appliance damage.
• Pull the power plug out, insert and fix it into the
power plug hook at the rear or on top of the
appliance. Failure to do so may cause damage
to the power plug or floor scratch.
• When transporting the appliance, more than
two people should transport the appliance
carefully. Dropping the appliance, which is
extremely heavy, may cause personal injury or
appliance failure.
• When transporting the appliance over a long
distance, keep the appliance upright. The
appliance may fall over, causing malfunctions.
Never transport the appliance laying down as it
can cause a refrigerant circulation malfunction
when it is turned back on again.
Notes for Installation
• Install the appliance on a solid and flat area.
− If the appliance is installed on an uneven
floor, it can cause vibration and noise causing
the appliance to fall resulting in injury. It could
also cause the doors not to close correctly
and introduce moisture inside the unit during
operation.
− If the appliance front or rear is not level,
adjust the front feet so that it can be
corrected. Severe cases may need the floor
to be packed out with strips of thin timber.
• Avoid placing the unit near heat sources, direct
sunlight or moisture.
• Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances
on the same outlet.
• After connecting the power supply cord (or
plug) to the outlet, Wait two or three hours
before you put food into the appliance. If you
add food before the appliance has cooled
completely, your food may spoil.
• Models with handles should be located at least
55 mm from the wall on the hinge side to open
door by 90°.
• Allow over 55 mm clearance to the right, left,
back and top when installing.
EN
13
Publicité
Chapitres
Dépannage
