dji Smart Controller Guide De L'utilisateur page 4

Disclaimer
Please read this entire document and all safe and lawful practice DJI
the DJI official website (http://www.dji.com) to download the full version of the User Manual and
carefully read all instructions and warnings therein before use. Failure to read and follow instructions
and warnings or lack of strong awareness of safety during the operation may result in serious injury
to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By using
this product, you hereby signify that you have read this disclaimer and warning carefully and that you
understand and agree to abide by the terms and conditions herein. You agree that you are solely
responsible for your own conduct while using this product, and for any consequences thereof. You
agree to use this product only for legitimate purposes. DJI accepts no liability for damage, injury or
any legal responsibility incurred directly or indirectly from the use of this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as "DJI") and its affiliated
companies. Names of products, brands, etc., appearing in this document are trademarks or registered
trademarks of their respective owner companies. This product and document are copyrighted by DJI
with all rights reserved. No part of this product or document shall be reproduced in any form without
the prior written consent or authorization of DJI.
This document and all other collateral documents are subject to change at the sole discretion of DJI. For
up to date product information, visit http://www.dji.com and click on the product page for this product.
This disclaimer is available in various languages. In the event of divergence among different versions,
the English version shall prevail.
Warning
Always stay alert when using the DJI Smart Controller Enterprise (hereinafter referred as "Smart
Controller") to control an Unmanned Aerial Vehicle (UAV). Carelessness may result in serious harm to
yourself and others. Always download and read the Disclaimer and Safety Guidelines of the aircraft
and the detailed User Manual before usage.
1. Fully charge the Smart Controller before each flight.
2. If the Smart Controller is turned on and the touch screen is off for five minutes, an alert sound will
be triggered. Ten seconds after the alert sound, the Smart Controller will automatically power off.
Move the sticks or perform some other action to cancel the alert.
3. Ensure the antennas are unfolded and adjusted to the proper position to achieve the optimal
transmission quality.
4. Contact DJI support to repair or replace the antennas if they are damaged. Damaged antennas
will greatly decrease performance.
5. Link the Smart Controller and the aircraft again if you change the aircraft.
6. Ensure to power off the aircraft before the Smart Controller.
7. Fully charge the Smart Controller every three months.
8. Immediately charge the Smart Controller when its power level decreases to 10% to prevent the
Smart Controller from damage due to over discharge for an extended period. Discharge the Smart
Controller to a power level between 40% and 60% if stored for an extended period.
9. DO NOT cover the air vent on the Smart Controller. Otherwise, the Smart Controller may become
too hot, which could affect its performance.
10. DO NOT disassemble the Smart Controller without the assistance of a DJI authorized dealer.
Always contact DJI or a DJI authorized dealer to replace the Smart Controller's components.
11. DO NOT block the Smart Controller's built-in GPS. In cases where the DJI Smart Controller
Enterprise Screen Mounting Bracket (hereinafter referred as "Mounting Bracket") is installed,
remove it and try again if GPS signal is poor.
12. To avoid wear and tear of the Stick Covers, DO NOT disassemble the sticks on a frequent basis.
2
TM provided carefully, and visit