Use - GlobalMIND VenenWalker basic Mode D'emploi

Use

CAUTION!
To prevent damaging the air chambers, do not bend the leg cuffs! Carefully fold
them after use before storing.
Do not open the zips on the leg cuffs during use as otherwise the cuffs could get
damaged.
Please make sure that the device is always free and is not covered by a blanket or
other objects.
The device can be operated both with batteries and with the supplied mains adapter.
To connect the mains adapter or insert the batteries, read the chapter "Putting into
Operation".
1. Put on the leg cuffs with the connections for the
air tubes pointing outwards.
2. Connect the air tubes to the connections on the
leg cuffs. Make sure that the tubes are connected
properly and cannot slip out.
3. Connect the plug for the air tubes to the connec-
tion on the control unit for in ating the leg cuffs.
4. Set the pressure adjuster to its maximum setting.
5. Switch on the device by pressing the On / Off but-
ton. The On / Off control lamp lights up as soon
as the device is turned on.
6. The leg cuffs are now alternately pumped up. If
the pressure on your leg is too strong or if it
feels unpleasant, set the pressure adjuster to a
lower setting. The ideal pressure setting should
feel strong but not unpleasant.
34