Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
CAUTION:
This machine will operate only on the AC frequency and electrical voltage shown on the nameplate. Make sure you have the
correct frequency and voltage before connecting the power cord to an outlet.
This machine must be connected to the electrical ground to protect the operator from electric shock. The machine has a power cord with two main
conductors and one earthing conductor. Connect the plug to the type of receptacle shown in figure 5. The green and yellow conductor cord is the
ground wire. Never connect this wire to any terminal other than the ground terminal.
WARNING:
Always use this machine with an AC three-conductor electrical system connected to theelectrical ground. Replace any worn,
cut, or damaged cords. Replace any damaged plugs, receptacles, or connector bodies. Do not move the machine over an
electrical cord. Always lift the cord over the machine.
Figure 5
Electrical Connection Instructions (230V)
8
Publicité
Table des Matières
