Getting Started With Windows 7 & Vista - Samson C01U Manuel Du Propriétaire

C01U · USB Studio Condenser Microphone
The following example is for setting up the
C01U in Windows 7 and Vista.
1. The first time you plug the C01U into a
USB port, Windows 7 or Vista will install
the universal drivers for that port. A
balloon will pop up, telling you the
computer has found the C01U.
2. When it is finished installing the drivers,
a balloon pop up will say "Your device is
installed and ready to use. "
Note: This balloon will only pop up when
you first plug the device into a particular
USB port.
3. To set the C01U as your default device
for recording, or to change its settings,
click the Start button, click Control Panel
and then click Sound. Under the Record-
ing tab, you can select the SAMSON
C01U from the menus and use the Set
Default button to set it as the default
device (figure 1).
4. To set the gain of the microphone, click
the Properties button, and then select
the Levels tab. You can choose to view
the Microphone volume level as either a
percentage or in dB, by right clicking on
the number box (figure 2).
Getting Started with Windows 7 & Vista
Figure 1
Figure 2
9