GRAUPNER MULTILADER 7E Instructions D'utilisation page 26

Environnemental Protection Notes
When this product comes to the end of its useful life, you must not dispose of it in the ordinary
domestic waste. The correct method of disposal is to take it to your local collection point for recycling
electrical and electronic equipment. The symbol shown here, which may be found on the product itself,
in the operating instructions or on the packaging, indicates that this is the case.
Individual markings indicate which materials can be recycled and re-used. You can make an important
contribution to the protection of our common environment by re-using the product, recycling the basic
materials or recycling redundant equipment in other ways.
Remove batteries from your device and dispose of them at your local collection point for batteries.
In case of R/C models, you have to remove electronic parts like servos, receiver, or speed controller
from the product in question, and these parts must be disposed of with a corresponding collection
point for electrical scrap.
If you don't know the location of your nearest disposal centre, please enquire at your local council
office.
EU Conformity Declaration
We hereby declare that the following product: MULTILADER 7E; Order-No. 6455
conforms with the essential protective requirements as laid down in the directive for harmonising the
statutory directives of the member states concerning electro-magnetic interference (2004/108/CE) and
LVD (2006/95/CE).
This product has been tested for electro-magnetic interference in accordance with the following norms:
EN60335-1 / EN 60335-2-29
EN50366
This declaration was produced by:
Graupner GmbH & Co. KG
Henriettenstr. 94-96
73230 Kirchheim/Teck
and is valid for the manufacturer / importer of the product
73230 Kirchheim/Teck, Germany, on 03.10.08
Hans Graupner
Managing Director
Page 13/14