Accessories; Protecting The Environment - Black & Decker AS36LN Traduction Des Instructions D'origine

ENGLISH
Drilling
Always apply a light pressure in a straight line
♦
with the drill bit.
Just before the drill tip breaks through the
♦
other side of the workpiece, decrease pressure
on the tool.
Use a block of wood to back up workpieces
♦
that may splinter.
Make an indentation using a centre punch at
♦
the centre of the hole to be drilled in order to
improve accuracy.

Accessories

The performance of your tool depends on
the accessory used. BLACK+DECKER and
Piranha accessories are engineered to high
quality standards and designed to enhance
the performance of your tool. By using these
accessories you will get the very best from your
tool.
This tool uses screwdriver bits with a 1/4"
(6.35 mm) hexagonal shank. Piranha Super-lok
accessories are designed for use with this tool.
Maintenance
Your BLACK+DECKER corded/cordless appliance/
tool has been designed to operate over a long
period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Warning! Before performing any maintenance on
corded/cordless power tools:
Switch off and unplug the appliance/tool.
♦
Or switch off and remove the battery from
♦
the appliance/tool if the appliance/tool has
a separate battery pack.
Or run the battery down completely if it is
♦
integral and then switch off.
Unplug the charger before cleaning it. Your
♦
charger does not require any maintenance
apart from regular cleaning.
Regularly clean the ventilation slots in your
♦
appliance/tool/charger using a soft brush or dry
cloth.
Regularly clean the motor housing using
♦
a damp cloth.
Do not use any abrasive or solvent-based
cleaner.
Regularly open the chuck and tap it to remove
♦
any dust from the interior (when fi tted).
52

Protecting the environment

Separate collection. This product must
not be disposed of with normal household
waste.
Should you fi nd one day that your BLACK+DECKER
product needs replacement, or if it is of no further use
to you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled
materials helps prevent environmental
pollution and reduces the demand for raw
materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
BLACK+DECKER provides a facility for the
collection and recycling of BLACK+DECKER
products once they have reached the end of their
working life. To take advantage of this service
please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
BLACK+DECKER offi ce at the address indicated in
this manual. Alternatively, a list of authorised
BLACK+DECKER repair agents and full details of
our after-sales service and contacts are available
on the Internet at: www.2helpU.com
Batteries
BLACK+DECKER batteries can be
recharged many times. At the end of their
useful life, discard batteries with due care
for our environment:
Do not short-circuit the battery terminals.
♦
Do not dispose of the battery(s) in a fi re as
♦
this may result in a risk of personal injury or an
explosion.
Run the battery down completely, then remove
♦
it from the tool.
Batteries are recyclable. Place the battery(s)
♦
in a suitable packaging to ensure that the
terminals cannot be short-circuited. Take
them to any authorised repair agent or a local
recycling station.