General Notices; Technical Features - Hendi 225929 Mode D'emploi

Dear Customer,
Thank you for purchasing this Hendi appliance. Please read this manual carefully before connecting the
appliance in order to prevent damage due to incorrect use. Read the safety regulations in particular very
carefully.

1. GENERAL NOTICES

This instruction manual must be kept carefully near
the appliance for future reference.
These notices have been drawn up for your safety and
the safety of others.
Please read this manual carefully before installing
and using your appliance.
• The appliance is intended for professional use and
must be used by qualifi ed personnel. It conforms
to directives: 2006/95/EC (Safety) 2004/108/EC
(EMC) CE: 90/396.
• The appliance must be wired to the mains power

2. TECHNICAL FEATURES

Model
Dimensions
Roof resist.
Floor resist.
Grill resist.
Approx. res.
Power max.
Voltage
3. INSTRUCTIONS FOR FITTER
The following instructions are written for a qualifi ed
fi tter to ensure that he performs installation, adjust-
ment and maintenance in the most correct manner
and in compliance with current regulations. Before
POSITIONING
The oven must be positioned on its support or at the
same height as a work surface. The side and rear
surfaces of the appliance must be accessible in order
supply by qualifi ed persons.
• The appliance must never be cleaned with direct
and powerful jets of water.
• Before performing maintenance or cleaning, dis-
connect the appliance from the mains power supply.
• Contact the After Sales Service for repairs or
maintenance.
• Improper or incorrect use or failure to comply with
the installation instructions absolve the manufac-
turer from any liability.
HENDI: 225929
620x555x(H)585 mm
700 W
1600 W
1800 W
3000 W
3000 W
230 V
using the appliance, remove the special protective
fi lm from the stainless steel parts, and do not leave
glue residue on the surfaces.
to enable the appliance to be connected to the elec-
tricity and water supplies and for normal mainte-
nance.
EN
3