Ribimex Ribiland PRSC600/200N Manuel D'instructions Et D'utilisation page 39

6.4- Storage
- Keep the product, the instructions manual and all accessories in the original packaging (if possible).
- Before storage:
Allow the machine to cool down
Wipe the log saw clean with a brush. Apply a thin layer of oil using an oily cloth to protect the
machine from rust.
- It is recommended to store the tool in a dry & clean location out of children's reach.
- Cover the saw properly if you store it in a shelter or in poorly protected room.
- Protect the motor and especially the switch against water and moisture.
- Do not store anything above or on the log saw.
6.5- Disposal
- Do not dispose the product with household garbage. Do not throw into the environment.
- Dispose of the product in a collection centre for waste of electrical and electronic equipment, or a
waste drop-off centre; or seek advice from your local municipality.
- Disposal of the product, accessories and packaging should be carried out according to local
regulations governing environment protection.
Our warranty conditions are available from our STAV department [*] and on our website.
Should you have any repair requests under the warranty, please contact your retailer or our STAV [*]
who will inform you on the procedure.
Should you have any parts and/or accessories request, you can contact our STAV [*] to ask for the
product exploded view by indicating our reference and the serial number or batch number appearing
on the nameplate.
[*] STAV = Technical and After-Sales Service department
STAV contact details:
Tel : 08 92 35 05 77 (0,34€/min ; only in France) ; email :
Internet Website: www.ribimex.com
Ribimex, 56 Route de Paris, F-77340 Pontault-Combault.
sav@ribimex.fr
Page 39 of 40