Ribimex Ribiland PRSC600/200N Manuel D'instructions Et D'utilisation page 26

The use of this product by children is forbidden.
Only well-instructed adults should operate the product. This product is not intended for use by
persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction concerning use of
the product by a person responsible for their safety.
5. Store idle product
When not in use, product should be stored in a dry and locked up place, out of reach of children.
6. Do not force the product
It will do the job better and safer at the rate speed for which it is intended.
Do not use the product for purposes other than those for which it is intended. The product will do a
better and safer job if it is used only for the purposes it was designed for.
Do not, under any circumstances, alter your log saw. This equipment was designed and engineered to
be used in accordance with the operating instructions. Altering the equipment or using the equipment
in such a way as to circumvent its design capabilities and capacities, could result in serious or fatal
injury.
Never try to cut logs larger than those indicated in the specifications table. This could be dangerous
and may damage the machine.
7. Use the right product
Do not force small products or attachments to do the job of heavy duty tools.
8. Dress properly
Do not wear loose clothing, gloves, neckties or jewellery; as they can be caught in moving
parts.
Wear protective hair covering to contain long hair.
9. Use protective equipment
Wear protective equipment appropriate to working conditions and work environment
Wear protective helmet, safety goggles, ear mufflers, face or dust mask or breathing mask with
proper filter, rubber gloves and non-skid footwear to reduce the risk of personal injury during
products use or manipulation.
10. Do not overreach
Keep proper footing and balance at all times.
Floor must not be slippery.
Never stand on log or log saw. Serious injury could occur if the tool is tipped or if the cutting tool is
unintentionally contacted.
Do not store anything above or near the log saw where anyone might stand on the tool to reach them.
11. Maintain product with care
Keep product clean for better and safer performance.
Follow instructions for lubrication and changing accessories.
Keep handles dry, clean and free from oil and grease
12. Disconnect (switch off) product
when not in use, before servicing and when changing accessories.
13. Remove adjusting keys and wrenches
Form the habit of checking to see that keys and adjusting wrenches are removed from the product
before starting it.
14. Avoid unintentional starting
Ensure switch is off before starting.
15. Stay alert
Watch what you are doing. Use common sense.
Never operate this machine or any other power equipment if you are tired, ill, or
under the influence of alcohol, drugs, or any other substance that could affect
your ability of judgment to use it properly.
16. Check damaged parts
Page 26 of 27