Zolia DOG TRAINING 200 Mode D'emploi page 6

Import Notice :​ the collar receiver is designed to be waterproof. The rubber cover has to put in the right
position. It may be hard to put it back when you are not used to it. You could take out the screw first
and it may help you to put the rubber cover to the right position.
How to check the static working :
Use the test light LED provided.
Attach the light to the metal probes – select static mode – you can see static symbol on the screen –
press the launch button – the LED will flash on.
Select a low number on the LCD display – put your fingers on the metal probes and press the launch
button.
Notes for use :
1- The lifetime of the batteries vary according as how often you use the product. Therefore, you should
often check the batteries by hearing the beep from the collar receiver and watching the indicator sign
on the LCD screen of the transmitter.
2- the valid distance of remote control means the straight-line distance between the transmitter and
the collar receiver without obstacles in between. If there are interference signals or signal screening
around, the actual remote control distance may vary.
3- This product is for pet training. Only by training, the pet can understand the intention ot its owner.
Good effect can only be achieved after a period of training.
4- Training sessions should be kept positive and short, about 10-15 minutes long each time.
5- presently, this product is the most effective and safest tool for training pet. Following the correct
operational instructions, you can effectively train the pet and bring it no harm.
Frequence : 433,825 MHz
Transmitter : 3,7V 500ms LiP
Recever : 3,7V 500ma LiP