WARNING
!
•
Turn off the gas and electrical power before servicing the appliance.
•
Appliance may be hot. Do not service until appliance has cooled.
For qualified technicians only:
•
Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous
operation. Verify proper operation after servicing.
•
This appliance and its venting system should be inspected before use and at least annually by a qualified service
person.
•
The flow of combustion and ventilation air must not be obstructed.
DOS
•
Clean your glass guard assembly (LVX only)
regularly (see "care of glass" section.) Clean your
safety barrier (LV only) or regularly to prevent the
build up of excessive lint/dust from carpeting,
pet hair, etc. Simply vacuum using the brush
attachment.
•
Always use ammonia-free glass cleaners.
•
Service your appliance annually and/or as
required. Service must be conducted by a qualified
technician.
•
Keep your appliance area clear and free of
combustible materials, gasoline, or other flammable
vapors and liquids.
•
Check to see that the burner ignites completely
on all openings when turned on. A 5 to 10 second
total light-up period is satisfactory. Service as
required.
note:
For any questions and/or concerns regarding your appliance, maintenance and service, please contact your
authorized dealer.
6.0 maintenance
DON'TS
•
Attempt to service the electrical or gas
components. Contact a qualified technician.
•
Use excessive force.
•
Use abrasive cleaners on glass.
•
Paint the pilot assembly.
•
Place objects too close to the fireplace opening
(all models) or air inlet and air outlet (LV models
fitted with optional DHC and LVX models)
maintenance
19
W415-2036 / E / 05.10.22
EN