Preparation
Preparation
EN
Brewing coffee with coffee beans
58
NOTE
When the appliance is in operation, the coffee jug (7) must
►
be under the filter compartment (10) and the lid of the coffee
jug must be fitted correctly. The lid of the coffee jug presses
the drip protector (9) upwards, and the coffee can flow from
the filter through the lid into the coffee jug.
The drip protector (9) prevents water running out of the
►
filter when the coffee jug (7) is removed from the appliance.
During the brewing process however, the coffee jug (7)
should not be removed from the appliance for more than 30
seconds, otherwise the filter will fill up and the coffee will
overflow.
When the brewing process has been completed, the "cup"
►
symbol (20) in the top left of the display starts flashing.
NOTE
Activate the display lighting by pressing any key. The
►
lighting goes out 60 seconds after the last button was
pressed.
Fill the water tank with water as described in the section
Filling with water.
Fill the appliance with coffee as described in the section
Filling with coffee beans.
Insert an empty unused filter bag as described in the section
Inserting a new filter bag.
Select the desired number of cups as described in the section
Setting the number of cups.
Set the desired strength of coffee as described in the section
Setting the coffee.
Set the grinding fineness as described in the section
the grinding fineness.
Press the
button (19) to switch on the grinder.
BEEM - Elements of Lifestyle
Setting