Setting The Time; Filling With Water; Filling With Coffee Beans - Beem Fresh-Aroma-Perfect Mode D'emploi

Setting the time

Insert the plug into the socket. The time
‹
on the display.
Set the hours by pressing the
‹
Set the minutes by pressing the
‹
►

Filling with water

Open the water tank lid (4).
‹
4
Place the grinder cover (1) onto the grinder (2).
‹
Fill the necessary amount of water for the number of cups
‹
required.
12
►
►
Close the water tank lid (4)
‹

Filling with coffee beans

Remove the grinder cover (1).
‹
Make sure that the water tank lid (4) is closed to prevent
‹
coffee beans from falling into the water tank.
Pour the coffee beans into the grinder (2). Do not overfill!
‹
Replace the cover (1) on the grinder (2).
‹
BEEM - Elements of Lifestyle
NOTE
The time will be stored until either a new time is entered
or the plug is removed from the socket for more than a
minute.
NOTE
The entire amount of water in the tank is always used,
independent of the number of cups or the strength of
coffee set.
Observe the filling level indicator (12) in the water tank.
Do not overfill !
Operation
12:00 starts flashing
button (30).
button (31).
EN
53