Setting The Grinding Fineness; Inserting The Filter - Beem 02049 Mode D'emploi

29
2. Fill the coffee bean compartment (2) with coffee beans. Do not overfi ll it!
3. Place the lid back on the coffee bean compartment.
When you switch to another type of coffee, there will still be coffee powder from the
previous type in the grinder shaft (14). The grinder shaft may need to be cleaned before-
hand (see the "Cleaning and Care" chapter – "Cleaning the Grinder Shaft").

Setting the Grinding Fineness

Twist the coffee bean compartment (2) to the right or left so that the scale arrow on
the coffee bean compartment points to the position with the grinding fi neness you want
(Picture A).
Five different levels can be chosen:
– all the way to the left: fi nest grinding level
– all the way to the right: coarsest grinding level
When you switch to another grinding strength, there will still be coffee powder with the
previous grinding strength in the grinder shaft (14). The grinder shaft may need to be
cleaned beforehand (see the "Cleaning and Care" chapter – "Cleaning the Grinder Shaft").

Inserting the Filter

1. Press the release button for the fi lter compartment (5).
2. Insert the fi lter insert (16) into the fi lter compartment.
3. Insert the permanent fi lter (17) or a basket fi lter paper into the fi lter insert (Picture B).
4. Close the fi lter compartment again. It must engage audibly.
Basket fi lter papers are available via our website www.beem.de or from our customer service
department on request.
Setting the Number of Cups
Keep pressing the button
(2, 4, 6, 8 or 10
The selected number of cups is saved until a new number of cups is set or the device has
been disconnected from the power supply for more than a minute.
02049_DE-EN-FR-ES-IT_A5_V4.indb 29 02049_DE-EN-FR-ES-IT_A5_V4.indb 29
(25) until the display
cups).
(19) shows the number of cups you want
EN
24.09.2018 15:51:08 24.09.2018 15:51:08