In Case Of Difficulty - Alpine PXA-H510 Mode D'emploi

Table des Matières

Publicité

Symptom/Symptôme/Síntoma
Unit does not operate./Nothing is displayed. /
L'appareil ne fonctionne pas./Rien n'apparaît à
l'affichage. / La unidad no funciona./No se
visualiza nada.
Power turns on but no sound is produced./
L'appareil se met sous tension mais aucun son
n'est produit./La alimentación se activa pero no se
produce ningún sonido.
No sound is produced from the speakers./Aucun
son n'est produit des haut-parleurs./No sale ningún
sonido de los altavoces.
Surround settings cannot be adjusted./Les
réglages surround ne peuvent être effectués./No
se pueden realizar los ajustes del sonido
envolvente.
Dolby Surround settings cannot be adjusted./Les
réglages Dolby Surround ne peuvent être
effectués./No se pueden realizar los ajustes del
Dolby Surround.
86
English/Français/Español

In Case of Difficulty

If you encounter a problem, please review the
items in the following check list. This guide will
help you isolate the problem if the unit is at
fault. Otherwise, make sure the rest of your
system is properly connected or consult your
authorized Alpine dealer.
Initial turn-on after
installation
Cause and Solution
Vehicle's ignition key is off.
Turn the vehicle's ignition key to on.
Unit's power is not on.
Turn the vehicle's ignition key to on, then
press "PWR" on the head unit to turn on
the power.
Power cord is not properly connected.
Connect the cord properly.
Fuse is blown.
Replace with a fuse of the specified
capacity.
Volume is set at minimum.
Increase the volume level. (refer p.20)
Cords are not properly connected.
Connect the cords properly.
Speaker is set to "OFF" mode.
Set the speaker to the "ON" mode. (refer
p.38 – 40)
Dolby Surround mode is set to "DIGITAL".
Do not input Dolby Digital signals.
Dolby Surround mode is set to "PRO LOGIC".
Set the Dolby Surround mode to "OFF".
(refer p.34 – 36)
No Dolby Digital signals are being input.
Input Dolby Digital signals.
Dolby Surround mode is set to "OFF".
Set the Dolby Surround mode to "PRO
LOGIC". (refer p.34 – 36)
English

Publicité

Table des Matières
loading

Table des Matières