Technical Data; Included In Delivery; General Safety Notes - EINHELL SS-LE 150 Mode D'emploi

Anleitung SS-LE 150 27.05.2003
GB
Please read these operating
instructions carefully with particular
attention to the safety notes. Always
store these operating instruccions
together with the vibrating grinder.

Technical data

Voltage 230 Volts
Power consumption 150 Watts
Grinding surface area 187 x 90 mm
Sandpaper size 240 x 90 mm
Vibrations per minute 11,000
Sound pressure level LPA 84,2 dB(A)
Sound power level LWA 97,2 dB(A)
Vibration a w <2,5 m/s 2
Weight 1,4 kg
Totally insulated

Included in delivery

SS-LE 150,
Dust extraction connector
Operating instructions,
10 sheets of sandpaper

General safety notes

– Always remove the plug from the power
supply socket before carrying out any
maintenance or repair work such as
cleaning the sander or changing the
sandpaper!
– Always disconnect the machine by
removing the plug from the socket, not
by pulling on the mains cable.
– Always wear safety goggles and dust
mask when working.
– Keep the workplace clean and well
illuminated.
– Ensure that the workpiece is sufficiently
secured so that you are able to work
safety and effectively.
– Keep children away from the machine.
– Always keep your machine clean, and
check for possible defects of damage
after every job.
– Always ensure that the switch is
switched off before you insert the plug
into the power supply socket.
– Ensure that any platforms you are
working on are sturdy and stable.
– If the machine is damaged, use the
exploded diagram and the spare parts
list to determine the precise cause of
the damage, and order any neccessary
parts from Customer
Service.
– The pad sander is not designed for wet
sanding.
4
10:25 Uhr Seite 4
1 Front gripp
2 On/Off trigger
3 Locking button
4 Main grip
5 Vacuum cleaner
attachment
6 Vibration plate
7 Clamping device
Attaching the dust extraction
connector
Note!
For health reasons, you must use a dust
extraction device.
On/Off switch
On: Press trigger 2.
Continuous Lock trigger 2 with locking
operation: button 3.
Off: Briefly depress trigger 2.