Fm Reception With Rds Information; Automatic Station Scan - TechniSat DIGITRADIO 230 OD Mode D'emploi

Align the antenna to improve reception (Section 5.3.2).

8.2 FM reception with RDS information

RDS is a procedure for broadcasting additional information via FM stations. Broadcasters
with RDS broadcast their station name or the programme type, for example. This is
shown on the display. The device can show the RDS information RT (Radio text), PS
(Station name), PTY (Programme type).

8.3 Automatic station scan

> Press the TUNE/SCAN knob to start the scan. Please note the scan settings in
Section 8.5 when doing so.
If an FM station with sufficient signal intensity is found, the scan stops and the
station is played. If an RDS station is being received, the station name appears
and, possibly, radio text.
Please use the manual station scan for setting weaker stations.
DE
EN
FR
IT
NL
NO
DK
PL
CZ
SK
107