Door Trim Removal; Fi Rebox Glass Door Removal - Napoleon Ascent Linear Serie Manuel Du Propriétaire

maintenance
EN
5.4

door trim removal

To remove, slide the back edge of the door trim up and out of the glass and the door frame.
To install, slide the back edge of the door trim down between the glass and door frame. Insert downwards.
5.5 fi rebox glass door removal
Leave a hand on the glass door during entire door removal. The glass door is secured to the fi rebox with four
(BL36-1) or six (BL46) spring latches. Pull the handles of the latches forward, then lift the latches out from the door
frame to release the door. Next, lift the door up until the bottom edge clears the bottom shoulder screws of the
appliance. Carefully grip the top and bottom of the door lifting it off the appliance.
note:
These spring latches make up the spring
relief system for the appliance. Ensure
the door opens freely and closes sealed.
note:
When mounting the door, ensure there
is equal space on both the left and the
right side. This allows for easy installation
of the front.
Reverse these steps to reinstall the door.
Ensure safety screen is installed correctly.
20
W415-2759 / C / 11.05.20
BL46 illustrated