Operation; Preheat Entry - Amana CMA2000 Série Manuel Du Propriétaire

Operation

ON
MENU
PRE-
STANDBY
A B C
HEAT

Preheat Entry

Preheat uses convection heat to bring oven
temperature to desired cooking temperature.
Preheat before convection or combination
cooking for best results.
To prevent personal injury, handle
utensils, racks, and door with
care. Utensils, racks, and door
may become hot during operation.
Operating Preheat Function
1. Verify oven display shows "READY".
• If oven display shows "STANDBY",
press ON/STANDBY pad.
• If "R" in "READY" is not flashing, open
and close oven door.
2. Press PREHEAT pad to enter preheat
mode. "F" flashes after temperature.
Temperature Mode
475F PREHEAT
3. Press arrow pads to increase or decrease
preheat temperature.
4. Press START pad to begin preheat mode.
Oven heats until oven reaches preheat
temperature. "WARMUP" appears.
475F PREHEAT
MENU A WARMUP
Current Menu Status
5. Oven signals when oven reaches preheat
temperature. "READY" appears. Oven is
ready to accept next entry if "R" is
flashing.
475F PREHEAT
MENU A READY
Status
Current Menu
MICROWAVE CONVECTION COMBINATION
Caution
c
c
OPTION
Reset or Cancel
1. Press PREHEAT pad. Oven display
shows preheat temperature, flashing "F"
and "PREHEAT".
2. Press arrow pads to adjust preheat
temperature. To cancel preheat mode,
press down arrow pad until oven display
shows "0F".
3. Press START pad.
Summary of Preheat Entry
1. Verify oven display shows "READY".
2. Press PREHEAT pad.
3. Press arrows to select temperature.
4. Press START pad.
5. Oven signals when oven reaches
preheat temperature.
11
START
1
2
3
4
5
6
7
8
STOP
RESET