Amana CMA2000 Série Manuel Du Propriétaire page 9

c, m, or cm
CLOSE DOOR
DOOR OPEN
FINISHED REMOVE FOOD
(A, B, C) PAD (1-8)
MANUAL COOKING
MANUAL COOKING PAUSE
MAXIMUM ALLOWABLE
DEFAULT COOK TIME
MAXIMUM ALLOWABLE
MICROWAVE COOK TIME
MAXIMUM ALLOWABLE
TOTAL COOK TIME
MENU (A,B, or C)
MICRO (10%-HI)
(A, B, C) PAD (1-8) COOKING
(A, B, C) PAD (1-8) PAUSE
(0, 150-475F) PREHEAT (0,70-250C)
PROGRAM NOT FOUND
PROGRAM PAD (1-8) TO USE
PROGRAMMING STAGE (1-4)
PUSH RESET TO DELETE
START TO START OVER
READY
READY c
SELECT COOK FUNCTION
STAGE (1-4)
STANDBY
WARM UP c
WELCOME
STANDBY
"c" indicates convection element is producing heat. "m" indicates oven is
producing microwave energy. "cm" indicates oven is producing microwave
energy and convection heat. Indicators are located in lower right corner of
oven display.
Displays when oven door is open. Element is no longer active because
door has been open more than 15 seconds. Oven is in convection,
combination, or preheat mode.
Displays when oven door is open.
Displays at end of cooking cycle.
Shows while cooking with manual cooking function.
Displays when cooking is interrupted by opening door or pushing
STOP/RESET pad.
Displays in user option mode when greatest default cook time is reached.
(Maximum = 10:00)
Displays when no additional microwave cooking time can be added.
(Maximum = 20:00)
Displays when no additional cooking time can be added.
(Maximum = 60:00)
Indicates which menu is selected for programming.
Indicates microwave power level.
Displays while cooking with programmable pad.
Displays when cooking is interrupted by opening door or pushing
STOP/RESET pad.
Indicates temperature when preheat is selected.
Indicates selected programmable pad has not been programmed.
Indicates beginning of a new programming stage.
Displays when STOP/RESET pad is pressed while oven is being
programmed.
Displays when oven is in ready mode. If "R" is flashing, pads are active.
Displays after oven has reached preheat temperature. If "R" is flashing,
pads are active.
Displays after beginning of a new stage while programming.
Indicates present cooking stage.
Displays when oven is in standby mode.
Displays when oven is preheating.
Displays when oven receives power.
9