Port Configuration; Installing Drain Line - Fantech SHR450 Manuel D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Port configuration

The unit has access doors on the front and back. Also, the main control panel may be moved from front to back allowing for ducting layout.
SHR 450, SHR 700, SHR 1200
COLD SIDE
Factory Setting. Unit may be easily reversed
in field.
SHR 800, SHR 1400
COLD SIDE
Factory Setting. Unit may be easily reversed
in field.

Installing Drain Line

Through normal operation and including defrost mode, the HRV may produce some condensation. This water should flow into a nearby drain, or be taken
away by a condensate pump. The HRV and all condensate lines must be installed in a space where the temperature is maintained above the freezing
point. A "P" trap should be made in the drain line. This will prevent odors from being drawn back up into the unit.
Install the drain hose, making a "P" trap
WARM SIDE
WARM SIDE
WARM SIDE
WARM SIDE
5
COLD SIDE
COLD SIDE

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Shr700Shr800Shr1200Shr1400444567

Table des Matières