Port Configuration; Installing Drain Line - Fantech SHR6904 Manuel D'installation

Port configuration

The unit has access doors on the front and back. Also, the main control panel may be moved from front to back allowing for ducting layout.
SHR 6904, SHR 6905R, SHR 11004, SHR 11005R
COLD SIDE
Factory Setting. Unit may be easily reversed
in field.
SHR 8004, SHR 14104
COLD SIDE
Factory Setting. Unit may be easily reversed
in field.

Installing Drain Line

Through normal operation and including defrost mode, the HRV may produce some condensation. This water should flow into a nearby drain, or be taken
away by a condensate pump. The HRV and all condensate lines must be installed in a space where the temperature is maintained above the freezing
point. A "P" trap should be made in the drain line. This will prevent odors from being drawn back up into the unit.
Install the drain hose, making a "P" trap
WARM SIDE
WARM SIDE
WARM SIDE
WARM SIDE
5
COLD SIDE
COLD SIDE