After Treatment; Maintenance; Troubleshooting - Home Skinovations Silk'n Jewel H3210 Mode D'emploi

10. After Treatment

When you have finished your treatment session:
1. Turn the device off by giving the control button an extended press.
Remember the last energy level setting you used, because it will not be
restored when you turn the device on again.
2. Remove the adapter from the electrical outlet.

11. Maintenance

It is important to clean your Silk'n Jewel device after each treatment. To clean
the device:
Unplug the device.
Use a dry, clean cloth to gently wipe the surface, including the
treatment surface.
After cleaning, we recommend you store the device in its original
box.
Never immerse your Silk'n Jewel or any of its parts in water.
J
J

12. Troubleshooting

Do not attempt to open or repair your Silk'n Jewel. You may exposure
yourself to dangerous electrical components or pulsed light energy.
You may cause serious harm to yourself and you will void your warranty.
Problem
My Silk'n Jewel does
not start.
Checks
Make sure the adapter is properly connected to the
device and that it is plugged into an electrical outlet
on the wall.
17
EN