Fein Turbo II X Série Mode D'emploi page 18

OBJ_BUCH-0000000234-002.book Page 18 Tuesday, August 1, 2017 8:47 AM
en
18
Working instructions.
Before mounting or replacing accessories, pull the mains plug. This preventive
WARNING
safety measure rules out the danger of injuries through accidental starting of
the vacuum cleaner.
Switching on and offm (figure 11).
Check the power supply cable
WARNING
and the plug for damage.
Switching on:
Set the On/Off switch to (I).
Switching off:
Set the On/Off switch to (0).
Integrated socket outlet
In switch position , the vacuum cleaner
automatically starts as soon as the power tool
connected to it is switched on.
Switch the vacuum cleaner off before con-
necting a power tool to the vacuum cleaner's
socket outlet. Make sure that the power tool
is switched off when inserting its plug into the
vacuum cleaner's socket outlet.
After switching off a power tool connected to
the vacuum cleaner's socket outlet, the vac-
uum cleaner will run on for approx. 15 sec-
onds and then automatically switch off.
Fig. 11
On/Off switch
Integrated
socket outlet
4.
3.
On/Off switch
1.
2.
On/Off switch