Fein Turbo II X Série Mode D'emploi page 13

OBJ_BUCH-0000000234-002.book Page 13 Tuesday, August 1, 2017 8:47 AM
Assembly instructions.
Before mounting or replacing accessories, pull the mains plug. This preventive
WARNING
safety measure rules out the danger of injuries through accidental starting of
the vacuum cleaner.
Removing and mounting the vacuum
cleaner lid (figure 3).
Open the fasteners on both sides and take off
the vacuum cleaner lid.
Mount the vacuum cleaner lid again and press
the fasteners down again.
Fig. 3
Vacuum cleaner lid
Fastener
2.
1.
1.
2.
en
13
1.
2.