Fein Turbo II X Série Mode D'emploi page 14

OBJ_BUCH-0000000234-002.book Page 14 Tuesday, August 1, 2017 8:47 AM
en
14
Locking the caster brakes (figure 4).
To actuate the caster brakes, push the metal
lever of the casters downwards.
Inserting the fleece filter bag
(Turbo II X) (figure 5).
Open the fasteners on both sides and take off
the vacuum cleaner lid.
For vacuuming fine dust and for low-dust dis-
posal, a disposal bag or fleece filter bag must
additionally be used.
When inserting a fleece filter bag, take care
that the closing cover and the fleece filter bag
face completely against the inside wall of the
container. The cardboard flange of the fleece
filter bag must be pulled over the collar of the
vacuum socket.
After removing the fleece filter bag, seal it
with the closing cover in order to avoid
debris.
Inserting a disposal bag
(Turbo II X AC/Turbo II X AC HEPA)
(figure 6).
Open the fasteners on both sides and take off
the vacuum cleaner lid.
For vacuuming fine dust and for low-dust dis-
posal, a disposal bag or fleece filter bag must
additionally be used.
When inserting, work the disposal bag over
the container rim. Pull the round opening of
the disposal bag completely over the collar of
the vacuum socket.
To remove, work the disposal bag up, and
pull it out toward the rear via the vacuum
socket. Seal off the disposal bag with the clos-
ing strip.
After vacuuming wet debris, always remove
the disposal bag.
Fig. 4
Caster
brakes
Fig. 5 Fleece filter bag
Fig. 6 Disposal bag