Tripp-Lite SRCOOL33K Manuel D'utilisation page 10

   

    
5. Operation
   
   

   
  
  
  
 
5.8 LOGS and INFO Menus


5.9 HELP Menu

5.10 Remote Monitoring and Control
The SRCOOL33K/SRXCOOL33K can be remotely monitored and controlled via SNMP , Web, telnet or Modbus. Remote monitoring and control
requires a network card such as Tripp Lite's SNMPWEBCARD (sold separately) in order to turn the SRCOOL33K/SRXCOOL33K into a
network-managed device. Please consult the SRCOOL33K/SRXCOOL33K installation manual and web card documentation for further
information on installing and configuring your network card. Update to the latest version of the SNMPWEBCARD firmware. It can be
downloaded from tripplite.com.
13-11-214-93-3139.indb 10
 
 
 
 

The eighth sub-menu allows you to reset the number of hours the current air
filters has been in use.
The ninth sub-menu allows you to set the time and access the Technician
menu.
The Technician menu is used for changing the electrical current settings
when using the unit in a hardwire configuration.
Please consult the Installation Manual for further information.
The LOGS menu provides access to the Event Log page. All alarms are entered into
the Event log, tagged with a time/date stamp.
The INFO Menu provides access to the Information Page. This page displays the
Model Name, Serial Number, Location, Unit Name and other information about the
SRCOOL33K/SRXCOOL33K.
The HELP Menu provides an on-screen tutorial showing how to navigate through the
menus and sub-menus.
WARNING! Do not change this setting on the SRCOOL33K when
using the supplied L6-30P input cord. Do not place setting at any
other value other than 24.0 Amps (with Input Cord) or 30.0 Amps
(Hardwire). Do not change this setting on the SRXCOOL33K.
10
12/10/2013 10:18:55 AM