Dik Geurts Jannik Medium Low EA Instructions D'installation page 23

I NS T AL L AT I ON M A N U A L
Contents
1. Introduction
2. EC Declaration of Conformity
3. SAFETY
3.1 General
3.2 Regulations
3.3 Precautions/safety instructions during installation
4. Unpacking
5. Installation
5.1 Regulations
5.2 Flue duct
5.3 Country-specific installation requirements
5.3.1 HETAS amendments
5.3.2 The Clean Air Act 1993 and Smoke Control Areas
5.4 Installing the fire
5.4.1 Free-standing/design fires
5.4.2 Insert fires (existing and new situation)
5.4.3 Built-in fires
5.5 Completing installation
6. Delivery
7. Maintenance
8. Malfunctions
9. Appliance-specific information
9.1 Smoke control area United Kingdom
9.2 Air slide valve and flue gas exhaust
9.2.1 Air slide valve
9.2.2 Flue gas exhaust
9.3 Interior lining
9.3.1 Vermiculite
9.3.2 Flame baffle plate
9.4 Adjusting the door / Replacing door seal
9.5 Supplementary installation instructions per appliance
9.5.1 Jannik Medium Low EA
9.5.1.1 Outside air connection
9.5.1.2 Adjusting the door / Replacing door seal
9.5.1.3 Disassembly of glass pane in door
9.5.1.4 Assembly of glass pane in door
9.5.2 Keld 5 Low EA and Ivar 5 Low EA
9.5.2.1 Outside air connection
9.5.2.2 Assembly/disassembly of glass pane in door
9.5.2.3 Replacing door seal
9.5.3 Keld 5 High EA and Ivar 5 High EA
9.5.3.1 Outside air connection
9.5.3.2 Assembly/disassembly of glass pane in door
9.5.3.3 Replacing door seal
9.5.4 Ivar 5 Store EA
9.5.4.1 Outside air connection
9.5.4.2 Assembly/disassembly of glass pane in door
9.5.4.3 Replacing door seal
Annex 1: Parts included with delivery
Annex 2: Technical information
UK