switel M 300 Mode D'emploi page 97

Using the phone
Using the torch
Press and hold down the switch marked with
You can also set the torch to permanent "on" (Menu -> Permanent
torch -> On).
a
Warning: The torch uses a high-brightness LED and you should
not point the beam directly into eyes, or view with optical instruments.
☞
Please note that this feature requires much energy and so the
standby time for the phone will significantly decrease.
Telephoning
☞
The phone has to be in idle state.
Dialling a telephone number and making a call
Key in the phone number including the area code. To make
international phone calls: Add a "+" by pressing
add the country (or region) code in front of the area code (delete
the leading 0 if necessary).
Press the call key to dial the telephone number.
For ending the call press the End Call button.
Making a call using the direct keys
Press one of the direct keys M1 - M3. The relevant number
saved to this key will be dialled. For saving a number to a direct
key refer to "Saving a phonebook entry to a direct key".
Making a call using the redial function
Press the call key in idle state. The last 10 dialled telephone
numbers will be displayed. Select an entry using œ/ƒ.
Press the call key to dial the telephone number.
.
twice, and
GB
11